adf7030-1 ez-kit user guide UG-1006 one technology way ? p. o. box 9106 ? norwood, ma 02062-9106, u.s.a. ? tel: 781.329.4700 ? fax: 781.461.3113 ? www.analog.com adf7030-1 ez-kit user guide please see the last page for an important warning and legal terms and conditions. rev. 0 | page 1 of 7 evaluation kit contents two adf7030-1 daughter boards ( ev-adf70301-915az , ev-adf70301-868bz , ev-adf70301-433az , or ev-adf70301-169bz ) two antennae two aducm3029 ez-kit boards ( adzs-ucm3029ezlite ) two lcd shield boards for the aducm3029 ez-kit board two 3.6 v batteries three usb cables one j-link lite emulator one universal 5 v dc power supply software and equipment needed adf7xxx ez-kit design suite contains the adf7030-1 design center, a powerful tool for evaluation, performance analysis, and configuration of the adf7030-1 iar embedded workbench? and segger? for embedded development and debug with the aducm3029 and the adf7030-1 general description the adf7030-1 ez-kit ? is an evaluation and development system for the adf7030-1 high performance, sub-ghz, rf transceiver. four ez-kit models are available for the adf7030-1 , covering various frequency ranges (see table 1). each adf7030-1 ez-kit allows fast and thorough evaluation of the adf7030-1 radio and provides a platform for host processor code development using the aducm3029 ez-kit mother board ( adzs-ucm3029ezlite ). the adf7030-1 ez-kit consists of the following: ? rf daughter boards. ? antennae for over the air packet error rate testing. ? aducm3029 ez-kit mother board and lcd shield for evaluation and development with the adf7030-1 . the adf7030-1 daughter boards plug into this mother board. ? adf7030-1 design center, a graphical user interface (gui) for evaluation of the adf7030-1 . the gui can be used for configuring the adf7030-1 , evaluating transmit and receive operation, and transmitting and receiving packets. table 1. available adf7030-1 ez-kit models model frequency adf70301-915ezkit 902 mhz to 928 mhz adf70301-868ezkit 863 mhz to 876 mhz adf70301-433ezkit 433 mhz to 434 mhz adf70301-169ezkit 169 mhz adf7030-1 ez-kit photograph 14688-001 figure 1.
UG-1006 adf7030-1 ez-kit user guide rev. 0 | page 2 of 7 table of contents evaluation kit contents ................................................................... 1 ? software and equipment needed ................................................... 1 ? general description ......................................................................... 1 ? adf7030-1 ez-kit photograph .................................................... 1 ? revision history ............................................................................... 2 ? evaluation kit contents ................................................................... 3 ? hardware ........................................................................................... 4 ? aducm3029 mother board ....................................................... 4 ? adf7030-1 daughter boards ..................................................... 4 ? hardware setup for evaluation ....................................................... 5 ? connecting the daughter board ................................................ 5 ? adf7030-1 daughter board j4 header .....................................5 ? usb connection ............................................................................5 ? power options ...............................................................................5 ? software ..............................................................................................6 ? adf7030-1 design center ..........................................................6 ? embedded development ..............................................................6 ? further information ..........................................................................7 ? adf7030-1 design package ........................................................7 ? adf7030-1 data sheet .................................................................7 ? adf7030-1 software reference manual (ug-1002) ...............7 ? adf7030-1 hardware reference manual (ug-957) ...............7 revision history 6/2016revision 0: initial version
adf7030- 1 ez- kit user guide ug- 1006 rev. 0 | page 3 of 7 evaluation kit contents table 2 describes the items common to every adf7030 - 1 ez - kit , while the items unique to each ez - kit are des cribed in table 3 , table 4 , table 5 , and table 6 . table 2 . items common to every adf7030 - 1 ez - kit item qty description adzs - ucm3029ezlite 2 aducm3029 ez - kit b oard. this is the mother board to which the adf7030 - 1 daughter board connects . lcd adapter board 2 lcd shield board for the aducm3029 ez - kit b oard. saft ls14250 2 3.6 v p rimary lithium - thionyl chloride (li- socl2) battery for powering the aducm3029 ez - kit board when not connected to the pc. usb c able 3 used t o connect the aducm3029 ez - kit b oard to the pc for use with the adf7030 -1 e valuation software. also provides power to both the aducm3029 ez - kit and the adf7030 - 1 daugh ter board . j - link lite e mulator 1 provides serial wire debug capabilities for the aducm3029 . universal 5 v dc power supply 1 alternative option to the usb for powering the aducm3029 ez - kit and the adf7030 -1 daughter board . table 3 . items unique to adf70301 - 915ezkit item qty description ev - adf70301- 915az 2 adf7030 - 1 daughter boards. see table 7 for further details. ant - 916- cw - hwr - sma 2 quarter wavelength whip monopole antenna from linx technologies , inc. frequency range = 900 mhz to 930 mhz . table 4 . items unique to adf70301 - 868ezkit item qty description ev - adf70301- 868bz 2 adf7030 - 1 daughter boards. see table 7 for further details. ant - 868- cw - hwr - sma 2 quarter wavelength whip monopole antenna from linx technologies. frequency range = 853 mhz to 883 mhz . table 5 . items unique to adf70301 - 433ezkit item qty description ev - adf70301 - 433az 2 adf7030 - 1 daughter boards. see table 7 for further details. ant - 433 - cw - hwr - sma 2 quarter wavelength whip monopole antenna from linx technologies. frequency range = 418 mhz to 448 mhz . table 6 . items unique to adf70301 - 169ezkit item qty description ev - adf70301- 169bz 2 adf7030 - 1 daughter boards. see table 7 for further details. fw.80.sma.m 2 quarter wavelength whip monopole antenna from taoglas. frequency range = 169 mhz .
ug- 1006 adf7030- 1 ez- kit user guide rev. 0 | page 4 of 7 hardware aducm3029 m other b oard a block diagram of the aducm3029 mother board is shown in figure 2 . the aduc m3029 ez - kit user guide and board design database is available from the analog devices website at www.analog.com/aducm3029ezkit . adf7030 - 1 daughter boards although adf7030 - 1 daughter boards are included in the adf7030 - 1 ez - kit , the boards are also available individually. the daughter boards plug into the aducm3029 mother b oard, which also comes with the adf7030 - 1 ez - kit . the available daughter boards are described in table 7 . details on the schematic, layout , and bill of material for each of these boards can be found in the adf7030 - 1 design package available at www.analog.com/ adf 7030- 1 . usb ftdi ft232rq 32mb spi flash adxl363 adt7420 uart0 uart0 tmr spi2 i 2 c0 i 2 c gpio pbs (2) leds (3) adf7030-1 daughter board gpio sport sport spi spi adc debug port clkin adp7102 3.3v ei3 (1a) arduino inter f ace rtc 32.768khz cr yst al 26mhz cr yst al swd 10 pin, 0.05" swd 20 pin, 0.1" usb w al l j-link adzs-ucm3029ezlite 14688-002 figure 2. aducm3029 ez - kit (mother board for the adf7030 - 1 daughter board) block diagram table 7 . adf7030 - 1 daughter boards model adf7030 - 1 package rf match frequency range (mhz) 26 mhz reference oscillator type matching topology frequency of included antenna (mhz) printed circuit board (pcb) layout name ev - adf70301- 915az 40- pin lfcsp 862 to 928 xtal separate pa and lna match 902 to 928 adf703x40sxxx ev - adf70301- 868bz 40- pin lfcsp 862 to 928 tcxo separate pa and lna match 863 to 876 adf703x40sxxx ev - adf70301- 460bz 40- pin lfcsp 450 to 470 tcxo separate pa and lna match not included adf703x40sxxx ev - adf70301- 433az 40- pin lfcsp 433 to 434 xtal separate pa and lna match 433 to 434 adf703x40sxxx ev - adf70301- 169bz 40- pin lfcsp 169 tcxo separate pa and lna match not included ev - adf70301- 169
adf7030- 1 ez- kit user guide ug- 1006 rev. 0 | page 5 of 7 hardware setup for e valuation connecting the daugh ter b oard the adf7030 - 1 daughter board plugs into the p1, p2 , and p3 headers on the aducm3029 mother board . ensure that the mother board is powered down before connecting the daughter board. take care when connecting and disconnecting the two boards to avoid da maging the headers on each of the boards. adf7030 - 1 daughter board j4 he ader in addition to the main p1, p2 , and p3 connection header , the adf7030 - 1 daughter board also provides a secondary header that exposes th e interface connections between the host processor ( aducm3029 ) and the adf7030 - 1 , as well as vdd and gnd. this header provides a useful debug header and also allows the adf7030 - 1 daughter board to connect to other h ost processor mother boards. if using this header as the m ain communication interface to the adf7030 - 1 (instead of using p1, p2 , and p3) , populate c3 on the adf7030 - 1 daughter board with a 10 f capacitor. 14688-003 figure 3 . j4 header on the adf7030 - 1 daughter board usb connection the mini usb connection (p6) on the aducm3029 mother board is the main usb communication port connection. this port has the following functions: ? provides the main com port for the adf7030 - 1 evaluation software . ? is used for uploading the firmware image code to the aducm3029 . ? provides power to the entire aducm3029 mother board . power options power from usb the usb is the default option for providing power to the aducm3029 mother board and the adf7030 - 1 daughter board.
UG-1006 adf7030- 1 ez- kit user guide rev. 0 | page 6 of 7 software adf7030 -1 design cent er the adf7030 -1 design center is a powerful software tool for evaluation, performance analysis , and configuration of the adf7030 -1 . it provides a gui for configuring the adf7030 -1 , evaluating transmit and receive operation, and transmitting and receiving pa ckets. installation download the adf7xxx ez -k it design suite from www.analog.com/eval - adf7030 - 1ez - kit . after downloading, double - click the executable to begin the installation. follow the on - screen prompts until the installation is complete. setup use the following procedure to set up the evaluation kit: 1. after installing the adf7xxx ez - kit design suite software, ensure that the adf7030 -1 daughter board is plugged into the aducm3029 mother board. p lug the usb cable into the mini usb port (p6) on the aducm3029 mother board , and plug the other end of the cable in to the pc on whic h t he software is installed . 2. s tart the adf7xxx ez - kit design suite so ftware. from the start m enu , go to all programs , analog devices , a df7xxx ez - kit design suite , and click adf7 xxx ez -k it design suite . 3. the adf7xxx ez -k it design suite start screen appear s when the program is opened. 4. from the main screen , the user can select the relevant device to evaluate. in this case , select the adf7030 -1 . 5. after selecting which device to connect with, a new screen appear s with a list of boards to connec t with, depending on the number of aducm3029 mother board s plugged into the pc. e ach of the boards connected to the pc has a b oard number displayed on the lcd screen. select o ne of the boards from the list to connect to, and then click ok t o b egin evaluation in the adf7030 -1 design center . embedded development the aducm302x ez - kit board support package (bsp) provides software and documentation in support of the aducm3029 mother board. it is available for download from www.analog.com/aducm3029ezkit . the aducm3029 mother board work s with the iar e mbedded w orkbench software development tools. for more details on iar, see the iar website. the bsp provides comprehensive software support for the aducm3029 mother board , which includ es drivers and services that demonstrate the on - chip drivers and services. the device driver and services documentation is part of the bsp.
adf7030-1 ez-kit user guide UG-1006 rev. 0 | page 7 of 7 further information this user guide describes the contents and setup of the adf7030-1 ez-kit . for more information, the following resources are available. adf7030-1 design package the adf7030-1 design package is a complete documentation and resource package for the adf7030-1 . it is recommended to download this package from www.analog.com/adf7030-1 as a starting point for evaluation and development. the design package contains manuals, application notes, hardware information, and firmware modules. adf7030-1 data sheet the adf7030-1 data sheet contains complete specifications and typical performance information for the adf7030-1 . adf7030-1 software reference manual ( ug-1002) the adf7030-1 software reference manual ( ug-1002) is the detailed programming guide for the adf7030-1 . this document provides a detailed description of how to control the adf7030-1 transceiver from the host microcontroller. it is intended as a resource for a firmware engineer developing host microcontroller firmware to communicate with the adf7030-1 . adf7030-1 hardware reference manual ( ug-957) the adf7030-1 hardware reference manual ( ug-957 ) provides a description of the adf7030-1 radio functionality, hardware features, and application circuit requirements. it is intended as a resource for a hardware engineer designing a pcb that includes the adf7030-1 . esd caution esd (electrostatic discharge) sensitive device . charged devices and circuit boards can discharge without detectio n. although this product features patented or proprietary pr otection circuitry, damage may occur on devices subjected to high energy esd. therefore, proper esd precautions should be taken to avoid performance degradation or loss of functionality. legal terms and conditions by using the evaluation board discussed herein (together with any tools, components documentation or support materials, the ev aluation board), you are agreeing to be bound by the terms and conditions set forth below (agreement) unless you have purchased the evaluation board, in which case the analog devices standard terms a nd conditions of sale shall govern. do not use the evaluation board until you have read and agreed to the agreement. your use of the evaluati on board shall signify your acceptance of the agreement. this ag reement is made by and between you (customer) and analog devices, inc. (adi), with its principal place of business at one technology way, norwood, ma 02062, usa. subject to the terms and condition s of the agreement, adi hereby grants to customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable li cense to use the evaluation board for evaluation purposes only. customer understands and agrees that the evaluation board is provided for the sole and exclusive purpose referenced above, and agrees not to use the evaluation board for any other purpose. furthermore, the license granted is expressly made subject to the following additional limitations: customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the evaluation boar d; and (ii) permit any third party to access the evaluation board. as used herein, the term third party includes any entity other than adi, customer, their employees, affiliates and in-house consultants. the evaluatio n board is not sold to customer; all righ ts not expressly granted herein, including ownership of the evaluation board, are reserved by adi. confiden tiality. this agreement and the evaluation board shall all be c onsidered the confidential and propriet ary information of adi. customer may not disclose or transfer any portion of the evaluation board to any other party for any reason. upon discontinuation of use of the evaluation board or termination of this agreement, customer agrees to promptly return the evaluation board to adi. additional restri ctions. customer may not disassemble, decompile or reverse engine er chips on the evaluation board. customer shall inform adi of any occurred damages or any modifications or alterations it makes to the evaluation board, including but not limited to soldering o r any other activity that affects the material content of the evaluation board. modifications to the evaluation board must comply with applicable law, including but not limited to the rohs directive. termina tion. adi may terminate this agreement at any time upon giving written notice to customer. customer agrees to return to adi the evaluation board at that time. limitation of liability. the evaluation board provided hereunder is provided as is and adi makes no warranties or representations of any kind with respect to it. adi specifically disclaims any re presentations, endorsements, gua rantees, or warranties, express or implied, related to the evaluation board including, but not limited to, the implied warranty of merchantability, title, fitness for a particular purpose or noninfringement of intellectual property rights. in no event will adi and its licensors be liable for any incidental, special, indirect, or consequential damag es resulting from customers possession or use of the evaluation board, including but not limited to lost profits, delay costs, labor costs or loss of goodwill. adis total liab ility from any and all causes shall be limited to the amount of one hundred us dollars ($100.00). export. customer agrees that it will not directly or indirectly export the evaluati on board to another country, and that it will comply with all applicable united states federal laws and regulations relating to exports. governing law. this agreement shall be governed by and construe d in accordance with the substantive laws of the commonwealth of massachusetts (excluding conflict of law rules). any legal action regarding this agreement will be heard in the state or federa l courts having jurisdiction in suffolk county, massachusetts, and customer hereby submits to the personal jurisdiction and venue of such courts. the united nations convention on contracts for the international sale of goods shall not apply to this agreement and is expressly disclaimed. ?2016 analog devices, inc. all rights reserved. trademarks and registered trademarks are the prop erty of their respective owners. ug14688-0-6/16(0)
|
